Syi Awwa C153 Ductile Iron Mechanical All Socket Cross Di Mechanical Joint Pipe Fitting

Basic Info.

Model NO.	AWWA C153
Specification	ISO2531/EN545/EN598/AWWA C153/AWWA C110
Trademark	SYI
Origin	China
Production Capacity	1500 Tons Per Month

Product Description

SYI Ductile Iron AWWA C153 MJ Pipe Fittings For Water Or Sewerage Pipeline Projects

Description

SYI can supply AWWA C153 MJ Fittings from 2" to 48", with the coating of Zinc and Black Bitumen coating, Red/Blue Epoxy coating,or PU (polyurethane) coating.

Standard

Material Characteristics:

Tensile strength(Mpa)	Elongation(%)	Brinell hardness(HB)
≥420	≥5	<=250

100% hydraulitic pressure test for each piece of SYI pipeline products!

Material	Ductile iron ASTM A536.
Working Pressure	350 PSI rating for 4"-24" sizes, 250 PSI rating for 30"-48" sizes.
Coating
Externall coatings: bitumen painting;zinc +bitumen painting;liquid epoxy painting;epoxy applied by FBE;according to customers' requirements.	Internall coatings: bitumen painting;cement mortar lining;;liquid epoxy painting;epoxy applied by FBE;according to customers' requirements.
Reference Rules	Dimensions and testing in accordance with ANSI/AWWA C153/A21.53.

Accessiories: Gaskets, bolts & nuts can be suppllied according to customer's requirements.Special fittings are available.Ductile iron pipe fitting is a kind of fitting casted from spherical graphite cast iron. The greater performance of ductile iron makes it possible to improve the design of fittings and to reduce their dimensions. This makes it easier to lay mains in congested urban areas of large towns, and results in a reduction in the size of valve chambers, the dimensions of which depend mainly on the space occupied by the fittings. It usually is used for jointing the pipelines for water, other liquids, or gas, with or without pressure, installed below or above ground, it allows pipeline deviation, change of direction or bore.

Mechanical joint in which sealing is obtained by applying pressure to the gasket by gland